Nabertherm LH 15/12 – LH 216/12 Chamber Furnace with Brick Insulation, 1200 °C
Chamber furnace for the laboratory with multi-layer insulation of light refractory bricks and heating from five sides, maximum temperature 1200 °C. Five sizes from 15 to 216 litres; the base is included and the controller can be taken off the door for operation. Available with controller B500 or C540.
- Key features Tmax 1200 °C
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
We reply to quote requests within one working day.
- Supplied through our manufacturer partnerships
- Installation, training and calibration on request
Overview
What this Nabertherm unit gives you, taken from the manufacturer data we hold on file.
- Key features Tmax 1200 °C
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
- High furnace chamber with five-sided heating for very good temperature uniformity
- Heating elements on support tubes ensure free heat radiation and a long service life
- Protection of bottom heating and flat stacking surface provided by embedded SiC plate in the floor
- LH models: multi-layered insulation of light refractory bricks and special backup insulation
- Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
- Door with brick-on-brick seal, hand fitted
- Generously dimensioned heating provides for short heating times
- Self-supporting arch for high stability and greatest possible protection against dust
- Controller B500 (5 programs with 4 segments each) or C540 (10 programs with 20 segments each)
- Technical data Model Tmax in °C Inner dimensions in mm (w x d x h) Volume in l Outer dimensions¹ in mm (W x D x H) Connected load³ in kW Electrical connection Weight in kg LH 15/12 1200 250 x 250 x 250 15 680 x 860 x 1230 5 3-phase² 170 LH 30/12 1200 320 x 320 x 320 30 710 x 930 x 1290 7 3-phase² 200 LH 60/12 1200 400 x 400 x 400 60 790 x 1180 x 1370 8 3-phase 300 LH 120/12 1200 500 x 500 x 500 120 890 x 1180 x 1470 12 3-phase 410 LH 216/12 1200 600 x 600 x 600 216 990 x 1280 x 1590 20 3-phase 470 ¹ External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. ² Heating only between two phases. ³ The connected load refers to the standard furnace and may increase for a furnace with additional equipment. For furnaces with connection options for multi-range voltages, the connected load applies to the highest permissible connected voltage.
- Models and article numbers Model Article no. with controller B500 Article no. with controller C540 LH 15/12 LH0222NKNE LH0222NMNE LH 30/12 LH0322NKNE LH0322NMNE LH 60/12 LH0622NKNE LH0622NMNE LH 120/12 LH1222NKNE LH1222NMNE LH 216/12 LH2122NKNE LH2122NMNE Additional equipment Parallel swinging door (user protected from heat radiation)
- Lift door with electro-mechanic linear drive for opening when hot
- Cooling system to cool the furnace with a defined temperature gradient or with a preset fresh air volume
- Protective gas connection to purge with non-flammable process gases
- Manual or automatic gas supply system
- Stainless steel hood for discharge of exhaust gases/exhaust air as an interface to the customer's extraction system
- Scale to measure weight reduction during annealing
- Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
- Price on request. Tell us your application and we send an offer.
Delivery and support
Lead time depends on the manufacturer and the configuration, so we confirm it with your quote. Delivery, installation, operator training and calibration can all be included, and we will price them separately so you can see what each part costs.
Tell us the country you need it delivered to and we will quote transport and any documentation your institution requires.
Ask about this item
Your quote list
This item is ready to send. Add anything else you need from the related items below and it goes out as one request.
Not sure which model fits your work?
Send us your samples, throughput and the standard you work to. We will come back with the model that fits and a written quote.



