Nabertherm LF 15/13 – LF 120/13 Chamber Furnace with Fibre Insulation, 1300 °C
Chamber furnace for the laboratory with fibre insulation and corner bricks, which shortens heating and cooling times compared with the brick-insulated LH series. Heating from five sides, maximum temperature 1300 °C. Four sizes from 15 to 120 litres, with controller B500 or C540.
- Key features Tmax 1300 °C
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
We reply to quote requests within one working day.
- Supplied through our manufacturer partnerships
- Installation, training and calibration on request
Overview
What this Nabertherm unit gives you, taken from the manufacturer data we hold on file.
- Key features Tmax 1300 °C
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
- High furnace chamber with five-sided heating for very good temperature uniformity
- Heating elements on support tubes ensure free heat radiation and a long service life
- Protection of bottom heating and flat stacking surface provided by embedded SiC plate in the floor
- LF models: high-quality fiber insulation with corner bricks for shorter heating and cooling times
- Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
- Door with brick-on-brick seal, hand fitted
- Generously dimensioned heating provides for short heating times
- Self-supporting arch for high stability and greatest possible protection against dust
- Controller B500 (5 programs with 4 segments each) or C540 (10 programs with 20 segments each)
- Technical data Model Tmax in °C Inner dimensions in mm (w x d x h) Volume in l Outer dimensions¹ in mm (W x D x H) Connected load³ in kW Electrical connection Weight in kg LF 15/13 1300 250 x 250 x 250 15 680 x 860 x 1230 7 3-phase² 150 LF 30/13 1300 320 x 320 x 320 30 710 x 930 x 1290 8 3-phase² 180 LF 60/13 1300 400 x 400 x 400 60 790 x 1180 x 1370 11 3-phase 270 LF 120/13 1300 500 x 500 x 500 120 890 x 1180 x 1470 15 3-phase 370 ¹ External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. ² Heating only between two phases. ³ The connected load refers to the standard furnace and may increase for a furnace with additional equipment. For furnaces with connection options for multi-range voltages, the connected load applies to the highest permissible connected voltage.
- Models and article numbers Model Article no. with controller B500 Article no. with controller C540 LF 15/13 LF0232NKNE LF0232NMNE LF 30/13 LF0332NKNE LF0332NMNE LF 60/13 LF0632NKNE LF0632NMNE LF 120/13 LF1232NKNE LF1232NMNE Additional equipment Parallel swinging door (user protected from heat radiation)
- Lift door with electro-mechanic linear drive for opening when hot
- Cooling system to cool the furnace with a defined temperature gradient or with a preset fresh air volume
- Protective gas connection to purge with non-flammable process gases
- Manual or automatic gas supply system
- Stainless steel hood for discharge of exhaust gases/exhaust air as an interface to the customer's extraction system
- Scale to measure weight reduction during annealing
- Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
- Price on request. Tell us your application and we send an offer.
Delivery and support
Lead time depends on the manufacturer and the configuration, so we confirm it with your quote. Delivery, installation, operator training and calibration can all be included, and we will price them separately so you can see what each part costs.
Tell us the country you need it delivered to and we will quote transport and any documentation your institution requires.
Ask about this item
Your quote list
This item is ready to send. Add anything else you need from the related items below and it goes out as one request.
Not sure which model fits your work?
Send us your samples, throughput and the standard you work to. We will come back with the model that fits and a written quote.



