IKA VACSTAR digital Membrane vacuum pump
The four-chamber membrane vacuum pump convinces with its high suction capacity, low space requirement and high serviceability. The setting of the parameters is carried out through a rotary-push button over a digital display showing current rpm.
- Automated processes are controlled with the vacuum controller VC 10, which is available as an accessory. An analogue cable which is required for connecting pump and controller is included in the delivery of the pump. Additionally it is recommended to use the VSE 1 vacuum safety emmission. It prevents that solvents are released into ambient air.
- The Vacstar digital is used for dry and oil-free applications in the laboratory. The membranes of the pump are particularly chemical resistant.
We reply to quote requests within one working day.
- Supplied through our manufacturer partnerships
- Installation, training and calibration on request
Overview
What this IKA unit gives you, taken from the manufacturer data we hold on file.
- Automated processes are controlled with the vacuum controller VC 10, which is available as an accessory. An analogue cable which is required for connecting pump and controller is included in the delivery of the pump. Additionally it is recommended to use the VSE 1 vacuum safety emmission. It prevents that solvents are released into ambient air.
- The Vacstar digital is used for dry and oil-free applications in the laboratory. The membranes of the pump are particularly chemical resistant.
- Technical data Pump rate max. (50/60Hz) 1.32 m³/h Pump rate max. (50/60Hz) 22 l/min Final pressure without gas ballast 2 mbar Suction levels 4 Cylinder 4 Connection diameter suction side 8 mm Connection diameter pressure side 8 mm Gas ballast valve no Input pressure 2 - 1030 mbar Boiling point detection no Solvent library no Two-point control yes Analog speed vacuum control yes Speed adjustment Turning knob Speed range 285 - 1200 rpm Display LED Vacuum sensor no Venting valve no Condensate trap no Emission condenser no Noise at low. pressure 54 dB(A) Material in contact with medium Al2O3; PTFE; FFPM; PPS; NBR Housing material alu-cast coating / thermoplastic polymer Clean room qualified no Explosion proofed no Dimensions (W x H x D) 150 x 375 x 370 mm Weight 11.5 kg Permissible ambient temperature 5 - 40 °C Permissible relative humidity 80% (up to 31°C), decreasing linearly to max. 50 (@40°C) Protection class according to DIN EN 60529 IP 20 RS 232 interface yes USB interface yes Analog output no Voltage 100 - 240 V Frequency 50/60 Hz Power input 130 W Power input standby 3 W Accessories Accessory Article no. Documents for qualification LAB 0010006577 Qualification Execution (IQ/OQ) LAB 0010010802 General Certificates (2.2 / 3.1) LAB 0010010524 IQ/OQ Documentation LAB 0010006581 Factory Calibration Certificate LAB 0010006579 VSW 1 0020015406 VC 10.500 Stand pole 0035002702 VSE 1 0035001873 VH.SI.8 Vacuum hose 0020013886 Labworldsoft® 6 Pro 0020017366 Labworldsoft® 6 Starter 0020019397 LR-2.ST the High-Performer 0020013291 VC 10 Vacuum controller 0020005132 Y hose connector 8 mm 0020010963 Article no. 0020016236. Price on request – ask BIEL engineering for a quote.
Delivery and support
Lead time depends on the manufacturer and the configuration, so we confirm it with your quote. Delivery, installation, operator training and calibration can all be included, and we will price them separately so you can see what each part costs.
Tell us the country you need it delivered to and we will quote transport and any documentation your institution requires.
Ask about this item
Your quote list
This item is ready to send. Add anything else you need from the related items below and it goes out as one request.
Related items in Vacuum Pumps & Controllers
Other instruments in the same category. Add any of them to your quote list.
Not sure which model fits your work?
Send us your samples, throughput and the standard you work to. We will come back with the model that fits and a written quote.