IKA VACSTAR control Membrane vacuum pump

What this IKA unit gives you, taken from the manufacturer data we hold on file.

• High-performance suction
• VACSTAR has an excellent suction performance, with its 22 l/min at a minimum of 2 mbar.
• Integrated vacuum controller with removable controller (WiCo)
• Depending on the application, you can easily select your operating mode either by using the intuitive operator menu or by remote control.
• For additional safety for users and environment, we recommend using the VSE 1 vacuum safety emission condenser, which prevents solvents from being released into the room air. The VSE 1 is available as accessory.
• Technical data Pump rate max. (50/60Hz) 1.32 m³/h Pump rate max. (50/60Hz) 22 l/min Final pressure without gas ballast 2 mbar Suction levels 4 Cylinder 4 Connection diameter suction side 8 mm Connection diameter pressure side 8 mm Gas ballast valve no Input pressure 2 - 1030 mbar Boiling point detection yes Solvent library yes Analog speed vacuum control yes Speed adjustment Turning knob Speed range 285 - 1200 rpm Display TFT Pressure unit / scale mbar, hPa, mmHg, Torr Vacuum sensor yes Vacuum sensor type ceramic Al2O3 Pressure max. for pressure sensor 1.2 bar Measurement range (absolute) 1 - 1030 mbar Control range 1 - 1030 mbar Resolution pressure 1 mbar Measurement uncertainty 1 mbar Vacuum valve no Venting valve yes Condensate trap yes Emission condenser yes Timer yes Noise at low. pressure 54 dB(A) Material in contact with medium Al2O3, PTFE, FPM, PPS Housing material alu-cast coating / thermoplastic polymer Clean room qualified no Explosion proofed no Mode automatic yes Mode manual yes Mode pump % yes Mode program yes Dimensions (W x H x D) 270 x 435 x 500 mm Weight 14 kg Permissible ambient temperature 5 - 40 °C Permissible relative humidity 80% (up to 31°C), decreasing linearly to max. 50 (@40°C) Protection class according to DIN EN 60529 IP 20 RS 232 interface yes USB interface yes Voltage 100 - 240 V Frequency 50/60 Hz Power input 140 W Power input standby 1.5 W Accessories Accessory Article no. Documents for qualification LAB 0010006577 General Certificates (2.2 / 3.1) LAB 0010010524 Qualification Execution (IQ/OQ) LAB 0010010802 Factory Calibration Certificate LAB 0010006579 IQ/OQ Documentation LAB 0010006581 VSW 1 0020015406 VSE 1 0035001873 VH.SI.8 Vacuum hose 0020013886 Y hose connector 8 mm 0020010963 Labworldsoft® 6 Starter 0020019397 Labworldsoft® 6 Advanced 0020105873 Labworldsoft® 6 Pro 0020017366 LR-2.ST the High-Performer 0020013291 Article no. 0020109375. Price on request – ask BIEL engineering for a quote.