Laboratory Equipment List: What Every Lab Needs
A working laboratory needs five groups of equipment: measuring tools, heating and cooling units, mixing and separation instruments, analytical instruments, and safety equipment with furniture. The exact laboratory equipment list depends on what you test, but most core items are the same in a chemistry, microbiology or QC lab.
Below is a practical list for planning a new lab or replacing old equipment, grouped by category and then by lab type.
What is laboratory equipment?
Laboratory equipment is any tool, instrument or apparatus used to prepare, measure, process, analyse or store samples under controlled conditions. It ranges from a 10 ml glass pipette to an HPLC system.
It helps to separate three things:
- Instruments: powered devices that measure or control something (balances, pH meters, spectrophotometers, ovens, centrifuges).
- Apparatus and labware: glass and plastic items used by hand (beakers, flasks, cylinders, pipettes, funnels).
- Consumables: items used once or a limited number of times (pipette tips, filters, tubes, gloves, reagents).
Budget for all three. Instruments are the big line items, but consumables are what you reorder every month.
Laboratory equipment list by category
This table covers the core equipment found in most labs, with what each item is for.
| Category | Equipment | What it is used for |
|---|---|---|
| Measuring | Analytical and precision balances | Weighing samples and reagents (analytical balances typically read to 0.1 mg) |
| Measuring | Volumetric flasks, graduated cylinders, burettes | Preparing solutions and measuring volumes |
| Measuring | Micropipettes and pipette tips | Dispensing small volumes, from about 0.1 µl to 10 ml |
| Measuring | pH meter, conductivity meter, thermometers | Basic physical and chemical measurements |
| Heating and drying | Drying oven | Drying glassware and samples, moisture determination, heat treatment |
| Heating and drying | Hotplate stirrer, heating mantle, dry block heater | Heating and mixing solutions, incubating tubes |
| Heating and drying | Water bath | Gentle, even heating of samples and media |
| Controlled environment | Incubator, climate chamber | Growing cultures, stability and storage tests at set temperature and humidity |
| Cooling and storage | Laboratory refrigerator and freezer (-20 °C, -80 °C) | Storing reagents, samples and kits |
| Mixing | Magnetic stirrer, overhead stirrer, shaker, vortex mixer | Dissolving, suspending and mixing |
| Separation | Centrifuge, microcentrifuge | Separating phases, pelleting cells and precipitates |
| Separation | Filtration set, vacuum pump | Clarifying liquids, sterile filtration, collecting solids |
| Separation | Rotary evaporator, distillation unit | Removing solvents, distilling, Kjeldahl nitrogen analysis |
| Sample preparation | Laboratory mill, grinder, homogeniser | Reducing particle size before analysis |
| Analysis | UV-Vis spectrophotometer | Concentration and absorbance measurements |
| Analysis | Titrator, HPLC/GC, NIR analyser | Quantitative chemical analysis |
| Observation | Microscope | Viewing cells, tissue, particles and surfaces |
| Water | Water purification system (distilled, DI or ultrapure) | Supplying reagent-grade water for solutions and rinsing |
| Safety | Fume hood, safety cabinet, eyewash, fire extinguisher, PPE | Protecting staff from chemicals, fumes and biological agents |
| Furniture | Benches, storage cabinets, chemical storage | Workspace, organised and compliant storage |
Basic lab equipment and glassware list
If you are equipping a teaching lab or a small QC corner, start with this basic set. Every item here appears in almost every lab.
- Beakers (50 ml to 1,000 ml): mixing and heating, not accurate measuring.
- Erlenmeyer flasks: mixing, titration, culture flasks. The narrow neck reduces splashing.
- Volumetric flasks: making solutions to an exact volume.
- Graduated cylinders: routine volume measurements.
- Burettes: delivering titrant drop by drop.
- Glass and plastic pipettes: transferring set volumes.
- Test tubes and racks: small-volume reactions and sample holding.
- Funnels and filter paper: gravity filtration.
- Petri dishes: culturing microorganisms.
- Wash bottles, spatulas, tongs, stands and clamps: everyday handling.
Choose borosilicate glass (such as DURAN) for anything heated or exposed to aggressive chemicals. Choose plastic (PP, PMP, PFA) where breakage is a risk or where glass would adsorb your analyte. Browse laboratory glassware and laboratory plasticware.
Which piece of lab equipment is used for measuring volume?
It depends on the accuracy you need. Use this as a rule of thumb:
| Item | Typical use | Accuracy |
|---|---|---|
| Beaker, Erlenmeyer flask | Rough volumes only | Low (graduations are approximate) |
| Graduated cylinder | Routine volumes | Medium |
| Burette | Titration | High |
| Volumetric (bulb) pipette, volumetric flask | Standards, exact dilutions | High (Class A is the tighter tolerance) |
| Micropipette | Microlitre volumes in biology and analysis | High, if calibrated regularly |
For anything that goes into a result, use Class A volumetric glassware or calibrated micropipettes. Pipettes drift with use, so schedule calibration at least once a year.
Lab equipment list by lab type
The core list above stays the same. What changes is the specialised equipment on top of it.
Chemistry lab equipment list
- Fume hood and chemical storage cabinets
- Analytical balance, pH meter, conductivity meter
- Hotplate stirrers, heating mantles, magnetic stirrers
- Drying oven and desiccators
- Rotary evaporator, distillation apparatus, vacuum pump
- Titrator (manual burette or automatic)
- UV-Vis spectrophotometer, chromatography (HPLC, GC, flash)
- Melting point apparatus
Microbiology lab equipment list
- Biological safety cabinet (class II for most work)
- Autoclave for sterilising media and waste
- Incubators (often several, at 30 °C, 37 °C and others)
- Refrigerators for media and reagents
- Water bath for keeping agar molten
- Microscope, colony counter
- Petri dishes, inoculation loops, spreaders, culture tubes
- Hot air sterilising oven for glassware
Molecular biology and PCR lab equipment list
- Micropipettes (separate sets for pre- and post-PCR areas) and filter tips
- Microcentrifuge and centrifuges with plate rotors
- Thermal cycler, qPCR instrument
- DNA/RNA extraction equipment and kits
- Vortex mixer, dry block heater
- -20 °C and -80 °C freezers
- Gel electrophoresis and imaging
- PCR consumables and reagents and kits
Pharmaceutical and food QC lab equipment list
- Analytical balances with documented calibration
- HPLC, dissolution tester, titrator, Karl Fischer titrator
- Kjeldahl digestion and distillation (protein in food and feed)
- NIR analyser for fast raw material checks
- Climate and stability chambers
- Laboratory mills for sample preparation
- Drying ovens for moisture and loss on drying
In a regulated QC lab, the equipment list is only half the job. Each instrument also needs installation, calibration and qualification records (IQ/OQ/PQ) before it is used for release testing.
How to choose and buy laboratory equipment
Before you ask for quotes, write down these five points for each instrument:
- The method: Which standard or SOP will it run? This sets the required temperature range, accuracy or volume.
- Throughput: Samples per day decide chamber size, rotor capacity or autosampler need.
- Space and utilities: Bench depth, power (230 V or 400 V), water, gas, exhaust.
- Compliance: Do you need audit trail software, calibration certificates, or IQ/OQ/PQ documents?
- Service: Who installs it, who calibrates it, and how fast spare parts arrive.
The last point is the one most often forgotten. A cheaper instrument with no local service can cost more over five years than a better-supported one.
New or used lab equipment?
Used equipment can make sense for simple items such as stirrers or water baths. For balances, pipettes, centrifuges and anything used in regulated testing, check that the unit can still be calibrated, that spare parts are available, and that you get its service history. Without those, the saving often disappears at the first audit or repair.
How to handle and maintain laboratory equipment
- Read the manual and train every user before first use.
- Keep a logbook per instrument: use, cleaning, faults, service.
- Calibrate on a fixed schedule and label each instrument with its next due date.
- Clean spills immediately. Use the cleaning agents the manufacturer approves.
- Balance centrifuge loads every time.
- Do not use equipment outside its rated range (temperature, speed, load).
- Sterilise reusable items correctly: steam autoclave at 121 °C for heat-resistant items, dry heat in an oven for glassware, validated chemical disinfection for items that cannot be heated.
How BIEL can help
BIEL engineering supplies laboratory equipment and consumables from Memmert, BUCHI, IKA, BRAND, DURAN/DWK, Kartell, Promega, Paralab, FRITSCH, Hettich, Leica and Metrohm to labs in North Macedonia and the Balkans. We install and calibrate the equipment we supply, prepare IQ/OQ/PQ qualification, and build complete turnkey laboratories with eLaborator lab furniture. Start with our lab instruments and equipment, laboratory furniture and safety and PPE ranges, or see our services.
FAQ
What are the basic laboratory equipment?
Beakers, flasks, graduated cylinders, pipettes, test tubes, funnels, a balance, a hotplate stirrer, a thermometer, a pH meter, a drying oven, a refrigerator, a fume hood and personal protective equipment. Most labs add a centrifuge and a water purification system early on.
What is lab equipment used for?
To prepare, measure, process, analyse and store samples under controlled and repeatable conditions, and to protect the people doing the work.
What equipment is used in a microbiology laboratory?
A biological safety cabinet, autoclave, incubators, refrigerators, water bath, microscope, colony counter, hot air oven, and consumables such as Petri dishes, loops and culture media.
How should basic laboratory equipment be used?
Only for its intended purpose and within its rated limits, by trained staff, with PPE, and with a logbook for use, cleaning and calibration. Check glassware for cracks before heating it.
What is the difference between equipment qualification and validation?
Qualification proves that an instrument is installed correctly and works to specification (IQ, OQ, PQ). Validation proves that a whole process or method gives reliable results. You qualify the equipment first, then validate the method that runs on it.
Where can I buy laboratory equipment in North Macedonia and the Balkans?
BIEL engineering in Skopje supplies laboratory instruments, glassware, plasticware, reagents and furniture, with installation, calibration and service. Browse the shop or send us your list for a quote.
Request a quote for your laboratory equipment list, and we will reply with options per item.